DIY Life

Sliding doors come in two flavors: they work like a charm or they're a pain in the buttocks. Because of their very nature, things can go wrong. For most repairs, the door will need to be removed. No big mystery here; just raise it up and swing it outward. Here's a few problems and their solutions:

• The door won't roll. Inspect the rollers. If they're loose, tighten them. If they're broken, replace them. Is the track bent? It can usually be tapped back into shape using a wood block and a hammer.
• The door doesn't glide like it used to or jumps off the track. Check the bottom rollers and track. Clean them both carefully and lubricate them with paraffin or silicone spray.
• The catch doesn't catch. Door catches don't last forever and if they won't catch properly, they won't lock either. Sometimes they get bent and don't mate up properly, and sometimes they just wear out. If it's broken or worn out, just replace it. If it's bent, remove it and clamp it in your vise. Use needle-nose pliers to straighten it out. Replace it and test it. It should click and catch when the door slides up and mates with the frame.
  

Use these tips and you'll be slidin' and glidin' in no time!