DIY Life

Road biking and mountain biking are as different in style as they are in culture.

Road biking requires cyclists working together in order to maximize their performance through drafting and other strategies. In my experience, the drawback is that in contrast to working together to get a better time, road biking can be very "every man for himself" when it comes to helping others with mechanical issues.

Mountain biking, on the other hand, seems to have a culture of assisting anyone who looks like they are struggling, in spite of the need for individual talent and achievement in order to excel at the sport.

There is no drafting on an intense section of single track. I have been lent tools, tubes, chain parts, tech tips, and encouragement during various rides when things have definitely not been going well. Many of these offers came entirely unsolicited from complete strangers who just happened to pass me and my friends when we had stopped to deal with a situation.

After the break I will, in the true spirit of mountain biking, share a few of the more unusual repairs I have encountered when either parts or tools have not been present to do the needed repairs properly.

With the help of the other 2 previous chapters in our fence making and repairing trilogy you are now ready to put on the final touches. Setting your posts and hanging your stringers has left you with an excellent and formidable foundation for your fence. Now it is time to make your fence look finished.

Pickets are what give your fence it's style and flair. Your fence will be as attractive as you want to make it. You could end up with a basic, respectable fence, or you could have a fence that the neighbors envy and compliments the design of your landscape and home, if you are willing to put in the work.

OK, you have obviously read about how to set your fence post correctly and are now ready to put up the more of your fence (If you haven't read that article you should, really, I'm not kidding. Please don't make me beg!).

This will involve putting up the stringers (the 2x4s that connect to posts together and which the pickets attach to). Properly setting the posts helped determine how strong your fence will be, and the stringers and the pickets will determine the look of the project. Hanging your stringers properly will help further the structural integrity of the fence, and it will help make hanging the pickets easier.

Now buckle-up and get ready to hang 'em like you mean it!

There are many easy principles that we all take for granted that you can use to amaze and delight your kids. All you have to do is make the time to spend with them.

These tricks are relatively fast and very simple to execute. The pay-off in looks of wonderment and excitement in you kids' faces will be well worth the time it takes to pull them off.

So plan to turn off the X-Box, PS 2 or 3, Wii or TV, and spend a few minutes with your kids as you introduce them to the wonderful world of mad science experiments.

One of the most fun and educational things you can do with your child(ren) is to start your own garden.

You don't have to make it a veggie garden, although eating what they grow does tend to intrigue the little ones. You can do a flower garden, a butterfly garden, or a cactus garden, to name a few.

I am also going to teach you how to add another twist to it. You and the small ones can build a garden that moves!

Why make a mobile garden? A mobile garden means you can change locations so you can use different plants at different times of the year that have different sunlight requirements. It also means that you can bring the garden to you when you want to work on it. Details after the break!

You've picked out the perfect new cabinets, and installed them yourself. Congratulations! Now you are ready to move on to the counter tops. What do you do? You can't place regular tiles on your masterpiece. You want to use solid granite, but the cost is way too high. You consider using stone tiles to achieve the same look, but we all know that even with the best installation you will still be able to see all those joints.

Granite2Go has come to the rescue for the DIYer in this quandary. Partnering exclusively with The Home Depot, they have arranged for 3 colors of granite to be stocked in some the home improvement giant's retail stores.

The popularity of pirates right now cannot be overestimated. The Pirates of the Caribbean franchise has made being a pirate cooler than a slushie on a hot summer day. If your children are fortunate enough to have a wooden play system in the backyard, here is an easy DIY project to turn it into their own pirate ship or defensive fort.

Treasures to be "acquired" for the project:

1 piece of 1/2" PVC pipe; 1 piece 3/4" PVC pipe; 1 piece 1" PVC pipe; 1- 3/4" floor flange PVC; 1- 3/4" male adapter PVC; 2- 3/4" caps PVC; 1- 3/4" tee PVC; 1- 3/4"x1/2" coupling PVC; 1- 3/4"x1" coupling PVC; 1"x2" coupling PVC; primer for PVC glue; PVC glue; plastic spray paint (C'mon, who wants a white telescope?); 1- 1/4"x1" hex bolt galvanized or stainless steel; 3- 1/4" washers galvanized or stainless steel; 1- 1/4" nylon lock nut galvanized or stainless steel

Perpetual Remodeling Syndrome (PRS) is brought to you every Thursday by Kelly Smith, who is hopelessly afflicted with this home-altering ailment. Remodeling can be a never-ending and contagious illness, so read on, at your own risk. Don't say we didn't warn you.

For the past few years I've been involved in what I have come to call PRS (Perpetual Remodel Syndrome). Ahh, the joys of home ownership. Since I do enjoy doing home improvement, I feel it's a blessing that my subdivision has no home owner's association. I know the argument; it keeps the standards up. But at least here, there's only one tacky house out of a few hundred.

That being said, today's topic is laying interior ceramic tile floors. Laying tile on a porch or patio has its own considerations.

Tools for the Project

• Wet saw
• Scraper
• Notched trowel
• Tile spacers
• Electric drill
• Ribbon mixer
• Utility knife
• Claw hammer
• Small pry bar
• Knee pads (Trust me!)
• Chalk line
• Tape Measure
• Rubber mallet
• Grout float and sponge
  

Preparing the Sub-floor

We wanted ceramic tile in the living room but wanted to keep the carpet until the kid could navigate without falling down. I found that the easiest way to remove the carpet was to pull it off the tack strips, cut it into 5' wide strips, roll them up, and use plastic tape to secure them. Then, I did the same with the padding. Next, use the claw hammer and pry bar to take up the tack strip. If there are any drywall compound splatters on the slab from the initial construction, scrape them up.

Now, to get the slab clean, don't sweep; the dust that has sifted through the carpet is very fine and will go airborne. Use a shop-vac. Eyeball the slab carefully. Minor imperfections are alright but if you have major ones, skim them with thinset.

Do Your Tile Layout

Find the center of the room in both directions and snap chalk lines. Visualize this; the chalk lines will look like a big plus sign with the intersection being in the exact center of the room. These are your "control lines." Be sure that your control lines are perpendicular. Use the 3-4-5 method and adjust as needed.

Now it's simply a matter of measuring back to find your border tiles (taking the grout line spacing into consideration). Once you have the border tile size, snap chalk lines so you'll know where to start laying tile. The lines will be parallel to the control lines so the borders might vary in size a bit as you go down the wall. Don't do all four sides of the room; you only need two walls (intersecting in the corner you'll be starting out of). Leave an exit; don't be like the guy that painted himself into a corner!

Mix the Mortar and Lay the Tile

I used mortar on my floor but there are other adhesives out there as well. Your choice. Spread the mortar or adhesive with the trowel evenly and begin laying the tile using the spacers. I like to lay about two rows of four full tiles on one chalk line and then cut and lay the borders. Then I do the same for the other line. Seat each tile by lightly rapping it with a rubber mallet.

Remember to spread the mortar slightly beyond where the tile will lay so there's no void. Voids cause tiles to crack at some time in your future, drawing displeasure from your spousal unit and casting a shadow of doubt over your impressive DIY skills. Don't go there.

All done? Clean up your tools and have an adult beverage of your choice.

Time to Grout!

Grouting is the fun part. I let the mortar dry for twenty four hours first. Mix the grout using the ribbon mixer again. I know you can buy it premixed, but that's cost-prohibitive for all but the smallest of projects. Start grouting where you started laying the tile if that worked well for you. Arm yourself with the sponge in a bucket of water.

First scoop some grout onto the float and work it in between the tiles (removing the spacers as you go). Then grab your sponge, wring it out, and start wiping the grout off the tile surface with a light touch, and forming the concave shape typical to grout lines. As the tiles dry off, you'll see a glaze on them. Don't worry about that now; you'll wipe it off with cheesecloth later.

Finally, after a day or so after the grout's dry, come back and apply a high-quality grout sealer. Other than nailing up the baseboard, your work here is done. As before, clean up your tools and enjoy an adult beverage. You've earned it!



Additional resources:
Laying a vinyl tile floor (This Old House)
Tile setting tools (The Tile Doctor)
Installing hardwood floor (Hometips)
Laying floor tile (Hammerzone)

Have you ever had one of those "uh-oh" moments where you realize that something small and expensive (think wedding ring) is suddenly missing? Did it fall into the engine block you were just assembling? Did it fall down the sink as you washed your hands? Did junior try to see if it would fit down the shower drain? All of these scenarios have one thing in common (besides divorce papers): You have no way of checking unless you spend some time taking things apart. Rigid has come to the rescue to save you from having to do any unnecessary disassembly.

Enter the SeeSnake Micro. It has a 2.4" color LCD screen that receives its signal via a 3' cable with built in LED lights and camera. It is a hand held, cordless unit that lets everyone get into tight, dark, messy places to find out what went where or what went wrong. It also includes attachments for item retrieval so you may just avoid having to disassemble anything at all. (I know that taking things apart is half the fun, but, really? drain pipes... yechh) If the 3' cable isn't long enough for you Rigid will let you extend it to a total of 30' with the purchase of additional cable.

Long meetings require many of us to resort to "performance enhancing substances" to keep awake. What happens, though, when you run out of your bootleg energy drink or the double mocha latte light with 3.5 pumps is all gone? We are faced with having to drink the swill that the bean counters have decided to pass off as coffee.

To call this liquid bile disgusting is too soft a term. It is invariably blacker than the pits of hell, has been kept heated since the late 50's, and long ago sold what little flavor it had to the devil in exchange for a Twinkie-esque shelf life. rather than burst into tears at the thought of either having to explain the snores coming from you chair or choke down this vile brew, I would suggest taking a page from the MacGyver handbook.

Overweight folks, beware the watt.

I am providing a concept for you that can accomplish several admirable goals all at the same time. If you're green-minded and spend your days telling people how we need to "save the planet," then you need to read this and put your butt where your mouth is...umm, sort of.

Convergence Tech Inc. is ready to provide you with complete plans for building a bicycle powered generator yourself . This generator utilizes any bicycle that is in decent shape and can easily produce between 150 to 200 watts at 12 to 20 volts DC. Bikes with larger wheel diameters provide a better mechanical advantage than bikes with smaller wheels but Convergence Tech indicates that their concept has been employed using bicycles of various sizes and types, all with satisfactory results. When you're done creating electricity, you can easily disengage the bike and ride it to work or school.

Sometimes the proposition of feeding the birds can provide significant aggravation if you have an ample supply of squirrels in your area. Squirrels can be relentless in their pursuit of your bird feed, especially if you have chosen to let the birds dine on sunflower seeds or chopped peanuts. However, it doesn't matter if you're giving your feathered friends sunflower seed, millet seed, safflower seed, chopped peanuts, or cracked corn, the fact of the matter is that squirrels will eat pretty much whatever the birds will, and most squirrels are hard wire programed not to share their food.

There are some simple yet effective ideas you can utilize to put those pesky squirrels on notice that your bird feeder is meant to be bird exclusive. You could always get a small game permit and shoot them to make a tasty meal, but I don't recommend that to most people because squirrels are hard to field dress. Let me share with you what I have found to be the three most effective, yet harmless squirrel prevention ideas.

Selecting the audio and video cards for your new computer can be a daunting task. Breaking down your computer needs and desires into terms of functionality, you can make sense of how the multitude of dedicated processing cards can be sorted out to serve your particular needs.

Dedicated processing cards are sort of like your computer's main processor, except they are designed to handle specific tasks and types of information. Video or graphics cards are responsible for how visual data is displayed on your viewing screen. Sound cards are responsible for handling the performance of your speakers and other music or sound-related working applications

Your dedicated processing cards are two of the biggest component decisions you'll encounter when making your new machine truly customized. To make good choices, you need to go back to the very beginning of your computer planning and review exactly what you want your new computer to accomplish for you. Once you are reaffirmed in your computer performance desires, then you can proceed in choosing your processing cards and make your machine truly personalized.