DIY Life

I recently offered up a DIY Life construction feature on building a rain barrel. I am very happy with mine; the (somewhat spotty) rainfall here in the north Georgia metro area, combined with my water saving techniques, puts ample water in the barrel to take care of my annual flowers and the newly installed plants in my yard.

When I built the barrel, I mentioned that I would temporarily use a hose for a discharge line but that, after some testing, I likely would make the change to hard pipe. My intent was to discard the hose laying on my deck and, more importantly, increase the discharge flow from the barrel. I am very pleased to report that my goals have been well satisfied. If you have a rain barrel, this upgrade just might be the thing for you.

Take a look at the gallery -- it'll be helpful.

Gallery: Construction Chronicles: Rain barrels redux -- hard piping the discharge line.

Dust is a major problem in my shop and most home wood shops. My tiny shop has more dust than projects in it. Not only does my enormous "portable" wet/dry vac suck at sucking and is even worse at filtering, it's a major roadblock to sweeping up at the end of the day. I've long dreamed of buying one of those big suck-your-brains-out dust vacuums that they sell at tool centers. However, even those have bags for filters and I never liked the way the old household bag vacuums would billow dust every time you turned it on. I imagined that the big monsters probably did the same thing only more. That can't be good for the lungs!

Enter Bill Pentz, woodworker, geek, and DIYer extraordinaire. Bill designed and built his own dust collection system that out performs just about everything on the market. His system really sucks!!

Most manufactured dust collection systems available to the home woodworker provide miserably low air volume and static pressure. According to Bill, none of the dust collection systems available in retail outlets provide even half of the air flow necessary to actually keep the dust from escaping large tools like your table saw, planer, jointer, or router table. The dust that does get swallowed up is often just spit back out into the air. Many of the filters don't actually filter the size of particles they advertise. Of course, we all could have guessed that much of marketing departments! In addition, course sawdust and the inevitable chunks of debrit damage even the best cartridge filters. A cyclone seperator like Bill's keeps all but the tiniest particles from getting to the filter allowing it to last indefinitely.