DIY Life

There are many times when you need to drill a hole only so far -- and no deeper. Either it's a "break-through" issue, or you're doing some production holes that have to be the same equal depth. This is easy enough with a drill press fitted with a dial-in depth stop.

But what to do if you don't have a drill press, or just as bad, the workpiece won't fit in it? This can easily be the case with a tabletop drill press.

You just have to DIY. All you need is your hand-held drill, the proper drill bit, and a roll of tape: electrical tape, duct tape, or masking tape -- your choice.

Simply measure the depth of the desired hole from the tip of your drill bit, and make a couple of wraps of tape around the bit. When your drill bit is spinning, the tape will blur into a perfect line. All you have to do is drill slowly, and back off just as you approach it!

There's no doubt about it: Indiana Jones is cool. After waiting almost twenty years for the fourth installment of the Indy series, the buzz is beyond buzzing. Indiana Jones and the Kingdom of the Crystal Skull, although it is not my favorite of the series, has every ingredient you have come to expect and love about an Indy movie.

So what's this got to do with DIY-ing? You can capitalize on all the movie hype and make your own Indiana Jones costume. Will you be perceived as cool, too? With lots of leather items and some electrical tape, how could you be anything but?

You'll need brown and black electrical tape, rope, a light brown and a dark brown leather belt, jeans, a fedora, and just a few minutes of your time. There are details about how to make a Indy-style shoulder bag and a whip using rope and electrical tape. Add a few key clothing items and your costume is complete.

So wear it to the movie, don that costume on Halloween, or just put on those duds and venture to the grocery store. You'll be Indy-cool, and that much cooler because you made it yourself.