DIY Life

Why on Earth would you want to build an owl house? Having owls take up residence on your property will cause the mouse population to dwindle: never a bad thing if the furry invaders like to live in your basement, attic, or -- yikes! -- your kitchen.

To build a screech owl house, you'll need ten feet of one-foot board, some hinges, nails, and screws, wood glue, and a little time. Research shows that owls like big houses with small entrance holes, which is what inspired this owl house plan from Audubon. They suggest hanging your owl house ten feet off the ground or higher.

You are now on your way to a mouse-free house! Similarly, if you'd like to see a few less mosquitoes, try building a bat house. Apparently, those buzzing buggers are quite delicious....

Pegboard can be a lifesaver in a workshop, sewing room, or the garage. Sometimes, though, it can be difficult to retrieve a favorite tool because the hanger wants to come out of the pegboard along with the tool. While using pegboard can keep a workspace neat and tidy, sometimes reinforcement is needed to keep your tools from elongating the holes.

Popular Mechanics has a great article teaching us how to make our own custom pegboard tool hangers, using aluminum and steel from the hardware store, a hacksaw, a drill and a pair of pliers. Cut, bend, and shape the aluminum or steel, screw it to the wall, and hang up your tools.

With these custom pegboard tool hangers, we really have no more excuses to let our precious tools clutter up our workspace. Not only are the tool hangers perfect for a man's workshop, I think they are also perfect for a sewing/crafting room pegboard too.

via: Curbly

In my house, there's a small wooden cabinet, somewhat scratched-up, which was given to us by a relative a few years ago. It has strange knobs in the form of faceted acrylic balls; they looked good in my aunt's antique-loaded home, but aren't so great in mine. The plastic parts look cheap to me, and overall, they don't quite suit the style of the cabinet.

So, last night, I took on a fifteen-minute project that I'd prepared for a few weeks ago: I changed the knobs.

The last time I was at The Home Depot, I bought four replacement knobs on a whim. The knobs I found, by Liberty Hardware, cost less than a dollar each; they have a nice design, reminiscent of stylized Japanese cherry (sakura) or plum blossoms (ume). If you don't like my selection, Liberty makes a number of low-cost brass decorative knobs. Some of their designs have a vintage feel.

The photo above is a "before" (taken from a slightly odd angle; this cabinet faces the end of a sofa with about an 18" gap between the two); click through to the break for an "after" and some instructions!

Stud finders are one of the best, but most unappreciated tools in a DIYer's toolbox. The real benefit of them is that they can find studs in your wall for hanging pictures, shelves, or light sconces.

This is a great step forward from the old method of rapping the skin off your knuckles, and then when you think you found a stud, drive in a finish nail to be sure.

The first generation of stud finders used magnets to detect drywall screws or nails. The next generation relied on checking the density in the wall (this is the kind I use since I use it quite often). The newer ones use radar technology to work their magic. How cool is that?

But if you're not going to use one often, make your own for just a few bucks. All you need is some mono-filament fishing line, a magnet, and a dab of hot glue or piece of tape. Just glue a length of mono to the magnet. Then, holding the end of the string, move it horizontally across the wall (and maybe a bit up and down) and the magnet will alert on a screw. Check out this magnet stud finder video.

The only caution is to make sure you found a stud, not a metal pipe or conduit. Just check up and down to be sure you intermittently find "positives." A pipe won't be discontinuous. Check horizontally as well, just for good measure.

Spring is nearly here, and for many of us that means hauling out our bicycles. Whether you're riding for fun, or commuting to work, a bike in good repair is essential to your safety and comfort.

Experts recommend a bike tune-up every year. Done professionally, this will cost you about $40, but you can easily do it yourself.

Here are 8 important things to do before heading out on your first ride. You'll find details about each step in these tips for tuning up your green-machine.

1. Pump it up!
2. Check for wear and damage
3. Check break lever and caliper action
4. Check break-pads
5. Check cables
6. Lube the chain
7. Tighten lose bolts and screws
8. Clean the bike

Once you've completed the tune up, you're ready to hit the road. Hopefully everything runs smoothly, but if you do encounter problems, this DIY bike repair site is a great resource for diagnosing and fixing common issues.

Winter is such a fun time, especially for the kids. Yeah, for us adults, it can be pretty frigid, but watching our little ones having fun making snow angels, snow men and snow balls makes it all better. Those little rosy cheeks and giggles can make you feel like a kid again.

You can keep the happiness going this winter season by building a backyard ice skating rink. Don't say it is too late in the season to do this project, because we have many months yet to go before Spring even thinks of popping up her lovely head. John walks you through the steps of what it takes to build a backyard ice rink. It is essential to choose the right location and make sure that you compensate for any areas in your yard that aren't level. Choose pressure treated lumber and be sure to buy a few extra boards. Even though they will cost more, it is best to purchase prime guard decking screws. If you purchase regular galvanized screws, the pressure treated wood will eat through them in no time. Buy some cheap liner, assemble the rink, fill with water, patiently wait, and then prep your rink for kid fun play time.

The ice rink takes some time and practice to make, but think of how happy your kids will be. You have just given them hours of fun, and in reality, this project does not cost much. You should be able to re-use the materials for a few years, and you will get better with practice. If you are in need of some tips and techniques if you are still unsure if you want to undertake the making of the ice rink, check out these backyard ice rink tips from John.

Hey woodworkers, here's a great little project: make your own small folding table. You know the kind I mean. The little square ones that are perfect for eating TV dinners off. Fabulous instructions, complete with photos and other illustrations, are on the site HandymanWire. The whole thing looks suitable for both experienced handymen/women and beginners, alike.

Yes, you can buy similar tables in the big box stores. They cost anywhere from $15 to $25 and up. Convenient, yes. But making your own will be so much more satisfying, don't you think? You will, however, have to allow some time and patience for the construction. Of course, you will also have to budget for the wood and hardware. Here what you'll need:
(1) 8-foot length of 1x6-inch wood. The designer of this particular table recommends cedar if the table is to be used outdoors.
(2) 1 1/2 x 1 1/2-inch brass hinges. Brass is required if the table is for outdoors use, otherwise any hinge will do.
(1) 5 x 1/4-inch bolt
(1) 1/4-inch nylock nut
(18) 1-inch #8 brass screws. Again, any screw will work, but brass is required for outdoors use.
Woodworking glue

Who couldn't use a little table like this? I love that it folds down for easy storage. Stow it in the garage or behind the couch, then pull it out when you need a little work space or a spot to rest your coffee mug.

Every now and then a sticky little problem presents itself to DIY'ers: stubborn screws that won't come out. Argh! You've tried being gentle. You've tried force. You swore. A lot. But that little sucker is still in there. Well, here are some handy extraction tips to guide you.

First step: diagnosis. Is the screw stuck for some reason? Corrosion is one possibility. (Or perhaps it has been glued into its hole.) Try loosening it with a substance like hydrogen peroxide, lemon juice, or a commercially-produced penetrating oil.

Wood screws can also get impossibly stuck if they were overtightened by the installer. (This is a pet peeve of mine, by the way.) The trick here is to use force, turning anticlockwise with a screwdriver whilst pressing as hard as you can against the screw. In this way, you may be able to loosen it without committing the cardinal sin of stripping the screw.

The vise-grip: every toolbox should have a pair. A garage without a pair of vise-grips is like a kitchen without a can opener. Why? They are incredibly strong and versatile, yet compact and inexpensive. I'm amazed at how many sticky situations my vise-grips have helped me out of. For those of you who are not familiar with VGs, they're like a heavy pair of pliers that lock onto whatever small object needs loosening or turning. The grip is incredibly powerful -- it enables even DIY-beginners with weakling muscles to get leverage on things that are stuck tight.

My top use for vice-grips is loosening stubborn screws and nails. If you can get the VGs to lock on at all, you can almost certainly get the job done. Vice-grips can also be used to clamp just about anything: small pieces of wood for sawing, or any object that is being glued, for example. I even use this thing in the garden to unscrew the hose from the sprinkler or from other sections of hose. Want more ideas on vise-grip uses? Click here.

Ahh, vice-grips, is there anything you can't do?