DIY Life

So you're fed up with your monthly gas and electricity bill? Or you're building a new abode and you want to get off on the right track with controlling how much utility power you have to buy from an outside producer?

What you need are alternate sources of energy. There are several ways to do this and you're free to mix and match in order to reach your energy freedom goals. No, I'm not recommending that you do any strip mining for coal in your backyard or install a nuclear reactor. (Might be a good idea, though.)

Choices for alternative energy sources

When it comes to providing some or all of your own energy sources, you have options, and the viability of these will vary according to where you live. Live out on the open plains? You're a good candidate for windmill type power (wind energy).

We love solar powered stuff here at DIY Life. Hacking things together ourselves in the interest of reducing our environmental footprint really gets us going. This DIY solar lantern is just the thing to keep the spirit of Earth Day even after it's come and gone.

Noel from unplugged living gives us a full detailed tutorial on making the solar lantern. Covering each step thoroughly, and providing loads of helpful pictures, diagrams and part lists, this is one project that will be easily recreated on your own.

This project is split into a three part tutorial. In the first part, Noel explains the basic theory of operation, then goes on to explain how to calculate the value of the resistor. In the second section, you'll learn about the charging module and solar cell. The assembly instructions are clear and detailed. Finally, in the third part, you'll see close-up pictures of each piece and how they should look together.

Staying green isn't always easy, but it sure is important. Noel brings us inspiration by combining our desire to go green with the love for great DIY projects. Gear up for your next camping trip with a solar powered lantern.

I am so excited that spring finally came yesterday. I spent most of the day outside picking up aluminum cans that were blown all over the yard, and my daughter, husband and I played in the dirt, soaking up the sun of a glorious 70 degree Sunday. I should have cleaned the grill, and cooked outside.

Now is the time to save money on the electric bill and start cooking outdoors. Even cooking with a grill can cost a ton of money, especially if you do it on a weekly basis. Ecobites has a wonderful alternative for us, featuring an article with instructions showing us how to make a solar cooker.

The solar cooker was made out of recycled plywood and recycled aluminum; items that were readily accessible, could soak up solar rays, and give a high enough temperature to safely cook food. Almost anything would work though, like the cardboard oven shown in the picture. Happy cooking!

I would not recommend gluing aluminum foil to a cooking surface. The chances of the glue leaking through to the food and contaminating it are too great. Try to find some other shiny reflective surface to cook with, or just don't glue the aluminum foil to the surface. To avoid injury to your eyes, wear sunglasses, and do not look right at the cooking surface. As always, safety is the number one priority for a DIY project.

Solar innovations are a hot topic on DIY Life. We love learning about new ways to combine solar power with our DIY passion. The solar food dehydrator is a great product of this combination.

You can make this out of cardboard boxes or wood depending on your handy skills, and how long you want it to last. You'll also need a piece of a garbage bag and some clear plastic. If you want added performance and a longer life, add some Styrofoam insulation. The solar dehydrator plans detail the assembly and offer tips for getting the best results.

The dehydrator can also be used for fruit or vegetables. It's a fun project with a tasty outcome. For an added challenge, make the food dehydrator from reused or recycled materials. You probably have everything you need around the house.

October 15 has been chosen as Blog Action Day, a day when the blogging community seeks to unite in voice for a common cause. The declared focus for this year involves our earthly environment and how we bloggers can aid in spreading the word about things we can all do to improve our stewardship of our world's resources. While the debate on "global warming" has been muddled to the point that the concept is now being called simply "global climate change," with scientists pointing at every conceivable cause, one core reality remains clear. That reality is the truth that our earth is a finite resource, and has always been deserving of our best efforts to take good care of it.

My Blog Action focus today is about "getting off the grid" via solar power, mainly because that's a pet concept of mine. The reason is simple: every volt of electrical energy that can be generated and utilized without involving existing utility structures reduces demand for exhaustible fuel reserves. So, in pursuit of reducing your dependence on commercially generated electrical power, here's a simple guide to solar-powered battery chargers, and other solar devices that you can buy or build yourself.

The water supply to your home is something you probably never think about until there is a problem. Heck, that's a way of life for most of us. Out of sight, out of mind. But with domestic water treatment plants, and even well water subject to breakdown, what can be your backup? The sun, that's what!

If you have access to the sun (heh) and a water source (almost any water source, clean or dirty), you too could be the proud owner of a clean water plant in that backyard sometime soon. That is, if you're up to building a miniature water distillation plant powered by the sun's rays. Yep -- no power source is needed here except the sun.

This has to be the coolest home gadget I've seen in a while, although it would probably not be used except in an emergency, or with someone wanting to provide clean water without any outside sources except maybe a nearby stream and sun access. Are you into mirrors, parabolic arrays, mylar, and some wire? Yes, this project takes more than that (plus some serious elbow grease), but the next time a tornado comes to town (or a hurricane), this project could be a lifesaver, literally.

No, not money. Not that kind of green. No one feels like they get paid enough, but we mean the kind of green that wins you brownie points with the great mother that is nature. Let's say that if you need your eco-fix, your green news fix, you have come to the right place, well almost.

DIY Life tries to bring you as much green news and ideas for caring for this environment of ours as we can, but admittedly, DIY is about much more than being green in the end, and we wouldn't want to leave out all the blue, purple, orange, and don't forget the woodgrain either.

We would like to introduce you to our kid sister, GreenDaily. A brand new, fresh and green blog to us here at Weblogs, inc. dedicated to the pursuit of life, green, and everything related. You really should check it out and see what is growing on over at GreenDaily. Here is a run-down of yesterday's slew of great stuff from GreenDaily:

• ReCellular, donate your used cell phone
• Porsche: surprisingly green?
• Organic bottled water? You can't be serious
• Try a refillable pen
• $5 cupcakes and food for thought on transportation
• McDonalds UK up for animal welfare award
• Colbert warns about the dangers of hybrid cars (video)
  
• Charge your cellphone battery with plant power
• Do you No 'Poo?

So, what are you waiting for? Grow to it! Sorry, couldn't help myself.

Perhaps this note is a bit early but I thought I'd remind you while there's still time to take advantage of the current residential solar and fuel cell tax credits. The current program is quite generous but it is slated for expiration on December 31, 2008. By taking advantage of the program now, homeowners can still reap significant tax benefits and if your capital expenditures for alternative energy installations exceed the program limits, you can carry the balance forward into the succeeding tax year.

The DSIRE website provides an accurate and understandable summary of the program and its parameters, as well as providing links to the legislation upon which the program is built. The site does also make clear that alternative energy installations which were initiated with assistance of other government programs are not eligible for additional tax breaks (no double dipping please).

It is expected that the next presidential administration shall surely extend the current program or shall probably create something even better, so please don't be too concerned that you'll miss out on these tax advantages. The most important things to remember at this time are to document your expenditures, consult with a professional tax adviser and remember that eligible projects can recover 30% of their cost of construction up to a total of $2,000.

My kids are a rambunctious pack of childhood energy just waiting to brim over and wreak havoc on our home. As a result I am always on the lookout for any sort of project that has a wide age range of appeal, they age 14, 10 and almost 3. A recent activity that captivated them all was making a solar oven that they used to cook hot dogs and chocolate chip cookies. The process is listed below:

Supplies:

• a cardboard box
• aluminum foil
• plastic wrap
• food such as hot dogs or cookie dough
• a hot area

Process:

• Cut cardboard box so that it has four sides and a bottom
• Line sides and bottom with aluminum foil
• Place food item in bottom of box
• Cover with plastic wrap
• Place box in hot environment and monitor for finished product

By many standards our solar oven is simple and modest. There are many more ways to make them more complex and more productive. Our hot dogs were well done and our cookies a bit on the gooey side, but it was an afternoon of activity that kept my brood occupied and happy, and that's a good thing in our house.

Here's an easy to build passive solar pool heater that really gets the job done. My father built one of these and installed it all in one day. You can make it as large as you want but remember that it will be installed next to your pool so you don't want to get too carried away. You can install it laying flat or upright and you can design your own configurations. All you need for it to work is full day exposure to the sun.

You'll want to have the passive collector placed on a hard surface which is painted flat black to get maximum value from the sun. A simple wood platform about 12 inches off the ground works great, or a concrete pad can make the project look especially professional. In areas where there is a high concentration of swimming pools an industrious person can even keep pretty busy building and installing these passive heaters for client pool owners. Additionally, similar solar collectors are being used to preheat water for in home use but that requires special engineering and a consultation with local building inspectors.