Search results
Results From The WOW.Com Content Network
Delta-sigma ( ΔΣ; or sigma-delta, ΣΔ) modulation is an oversampling method for encoding signals into low bit depth digital signals at a very high sample-frequency as part of the process of delta-sigma analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). Delta-sigma modulation achieves high quality by utilizing a ...
Oversampling DACs or interpolating DACs such as those employing delta-sigma modulation, use a pulse density conversion technique with oversampling. Audio delta-sigma DACs are sold with 384 kHz sampling rate and quoted 24-bit resolution, though quality is lower due to inherent noise (see § Figures of merit).
Delta modulation ( DM or Δ-modulation) is an analog-to-digital and digital-to-analog signal conversion technique used for transmission of voice information where quality is not of primary importance. DM is the simplest form of differential pulse-code modulation (DPCM) where the difference between successive samples is encoded into n-bit data ...
A delta-sigma ADC (also known as a sigma-delta ADC) is based on a negative feedback loop with an analog filter and low resolution (often 1 bit) but high sampling rate ADC and DAC. The feedback loop continuously corrects accumulated quantization errors and performs noise shaping : quantization noise is reduced in the low frequencies of interest ...
Y-Δ transform. In electrical engineering, the Y-Δ transform, also written wye-delta and also known by many other names, is a mathematical technique to simplify the analysis of an electrical network. The name derives from the shapes of the circuit diagrams, which look respectively like the letter Y and the Greek capital letter Δ.
A 1-bit DAC (sometimes called Bitstream converter by Philips) is used as a consumer electronics marketing term describing an oversampling digital-to-analog converter (DAC) that utilizes a digital noise shaping delta-sigma modulator operating at many multiples of the sampling frequency that outputs to an actual 1-bit DAC (which could be fully differential to minimize crosstalk).
Pulse-density modulation, or PDM, is a form of modulation used to represent an analog signal with a binary signal.In a PDM signal, specific amplitude values are not encoded into codewords of pulses of different weight as they would be in pulse-code modulation (PCM); rather, the relative density of the pulses corresponds to the analog signal's amplitude.
A DAC to convert the ith approximation xi to a voltage. A comparator to perform the function s(xi − x) by comparing the DAC's voltage with the input voltage. A register to store the output of the comparator and apply xi−1 − s(xi−1 − x)/2i. Operation of successive-approximation ADC as input voltage falls from 5 to 0 V. Iterations on ...