Search results
Results From The WOW.Com Content Network
Within Australia, mobile phone numbers begin with 04 or 05 – the Australian national trunk code 0, plus the mobile indicator 4 or 5 – followed by eight digits. This is generally written as 04XX XXX XXX within Australia, or as +61 4XX XXX XXX for an international audience.
Former Australian dialling codes. Four-digit telephone number in Glebe, New South Wales, in the 1950s. The format of telephone numbers in Australia has changed over time to allow for the expansion of the subscriber base as technology has improved.
Most Australian telephone numbers have ten digits, and are generally written 0A BBBB BBBB or 04XX XXX XXX for mobile telephone numbers, where 0A is the optional "area code" (2,3,7,8) and BBBB BBBB is the subscriber number.
E.164 defines a general format for international telephone numbers. Plan-conforming telephone numbers are limited to only digits and to a maximum of fifteen digits. The specification divides the digit string into a country code of one to three digits, and the subscriber telephone number of a maximum of twelve digits.
Country calling codes, country dial-in codes, international subscriber dialing (ISD) codes, or most commonly, telephone country codes are telephone number prefixes for reaching telephone subscribers in foreign countries or areas via international telecommunication networks.
A telephone numbering plan is a type of numbering scheme used in telecommunication to assign telephone numbers to subscriber telephones or other telephony endpoints. Telephone numbers are the addresses of participants in a telephone network, reachable by a system of destination code routing.
In countries participating in the North American Numbering Plan, such as the United States, Canada, and some Caribbean nations, this number is dialed as 011 61 2 3456 7890, with 011 being the international call prefix for the NANP and 61 being the country calling code of Australia.
In the international telephone network, the format of telephone numbers is standardized by ITU-T recommendation E.164. This code specifies that the entire number should be 15 digits or shorter, and begin with an international calling prefix and a country prefix .
This is a list of international dialing prefixes used in various countries for direct dialing of international telephone calls.
An old bakelite ash tray showing an example of a single digit phone number used in the early days of telecommunication. On 12 July 1906 the first Australian wireless overseas messages were sent between Point Lonsdale, Victoria and Devonport, Tasmania. Australia and New Zealand ratified the 1906 Berlin Radio-telegraph Convention in 1907.