Search results
Results From The WOW.Com Content Network
An earth-leakage circuit breaker ( ELCB) is a safety device used in electrical installations with high Earth impedance to prevent shock. It detects small stray voltages on the metal enclosures of electrical equipment, and interrupts the circuit if a dangerous voltage is detected. Once widely used, more recent installations instead use residual ...
A residual-current device (RCD), residual-current circuit breaker (RCCB) or ground fault circuit interrupter (GFCI) is an electrical safety device that interrupts an electrical circuit when the current passing through a conductor is not equal and opposite in both directions, therefore indicating an improper flow of current such as leakage current to ground or current flowing to another powered ...
The 2008 code did away with the previous 42 circuit limitation on panelboards. One can now order panelboards with as many as 84 circuit places, and a corresponding ampacity rating. If a panelboard with a sufficient number of breaker positions is installed in the first place, the need for non-CTL breakers should be eliminated.
Rockwell Automation began in 1903 as the Compression Rheostat Launch Company. It was founded by Lynde Bradley and Dr. Stanton Allen with an initial investment of $1000. [2] In 1904, 19-year-old Harry Bradley joined his brother in the business. The company's first patented product was a carbon disc compression-type motor controller for ...
An electrical contact is an electrical circuit component found in electrical switches, relays, connectors and circuit breakers. [1] Each contact is a piece of electrically conductive material, typically metal. When a pair of contacts touch, they can pass an electrical current with a certain contact resistance, dependent on surface structure ...
Stab-Lok is a brand name of electrical circuit breakers that were manufactured primarily by Federal Pacific Electric between 1950-1980. [1] [2] In June 1980, Reliance Electric, which had purchased FPE, reported to the United States Consumer Product Safety Commission that "many FPE circuit breakers did not fully comply with Underwriters ...
Transient recovery voltage. A transient recovery voltage ( TRV) for high-voltage circuit breakers is the voltage that appears across the terminals after current interruption. It is a critical parameter for fault interruption by a high-voltage circuit breaker, its characteristics (amplitude, rate of rise) can lead either to a successful current ...
Lockout–tagout. Lockout Tagout hasp can accommodate up to 6 padlocks, can be used during group LOTO procedure. Lock out, tag out or lockout–tagout ( LOTO) is a safety procedure used to ensure that dangerous equipment is properly shut off and not able to be started up again prior to the completion of maintenance or repair work.